Higher dry film thickness up to 50 microns (DFT) can be achieved in one coat spray application.

Epoxy primer for ferrous and non- ferrous metals and have a very good adhesion.

Good flow and wetting and penetration characteristics.

Does not contain lead and chrome containing pigments.

Can be top coated with finishing paints based on chlorinated rubber , acrylic, epoxy and two component polyurethane and compatible with REPOCEM repair composites.

Highly used in protection of steel structures under industrial and saline conditions.

Mainly use in fertilizer plants, steel bridges, thermal power plants, gas works, paper mills, steel plants etc.

Remove grease laitance, loose rust and other contaminants etc. before application.

Blast clean to a minimum of Sa 21 12 Swedish Standard. If blasting is not practical make use of mechanical tools, manual chipping and wire brushing.

Apply by using brush, conventional or airless Spray.